Industry News - News

Home / News / Industry News (Page 5)

Daily inspection and maintenance work for dispatching winches
2019-09-21
Dispatching the daily inspection and maintenance work of the winch, blindly making mistakes, carelessly making the equipment make mistakes, stay away from blindness, and stay away from danger, especially for mining equip...
Use of back column winch explosion-proof and explosion-proof devices
2019-09-30
The use of the explosion-proof and explosion-proof device of the column winch, the selection of high-quality internal structure of the column winch explosion-proof motor, and the external environment prevention work to c...
Winch sensor depth error processing method
2019-10-12
The depth error does not necessarily mean that the winch sensor has failed. 1. The depth is not accurate. When the hook is running up and down, the same distance measurement winch pulse is different, indicating that the ...
Introduction to the method of rope construction on mining winch
2019-10-19
Construction method 1. According to the design of the construction organization, select the wire rope used by each winch. 2. Use a 50-ton crane and use a steel wire rope with a diameter of 18.5 mm and lift it with both e...
Mining winch material recycling precautions
2019-10-26
Mining winches occupy an indispensable position in material recovery, and the relevant safety factors must be paid attention to at work. safe job 1. Check the roadway before recycling, and find that the roadway is damage...
Analysis of the Causes of the Accidents in the Back-track Winch Trailing Lane
2019-11-01
Reasons for the accident of the inclined roadway sports car (1) The connection device breaks and causes a sports car. Because the link between the mine car, the bolt or the mine car connector is unqualified, the damage i...